Two Pack Specialty

Campoxy Accelerator K


It is designed to speed up the cure response in Cameleon Solvent Free Epoxy Range. It is added as a third component to the Campoxy EAB608 and Campoxy SFE600 Mix. It is designed for the use in areas where cold temperatures are expected to extend the drying time.

Colour: Amber.

Campoxy Accelerator


This product was designed to speed up the cure response in Campoxy ZP550, Campoxy EPZ557 and Campoxy EHB585. It is added as a third component. It is for the use of areas where cold temperatures are expected to extend the drying time.

Colour: Amber.

Campoxy EAB608


It is a Premium Quality 2 Pack Epoxy Coating, which is formulated for Application onto Concrete Surfaces with the option of using an Aggregate such as Clean Sand to produce High Strength Filling Compound. With a mixed volume solids of 100%, it allows both Penetration and Flow to produce Medium Film Builds and when it is mixed with suitable Aggregate an easily Workable Filling Compound for Damaged Concrete. It can Cure at Low Temperatures down to 5˚C and will tolerate Small Amounts of Surface Dampness. It is ideal for Concrete Flooring Systems where a Medium-High Dry Film Thickness is Adequate. It is suitable for areas where Water will be Present, Continual Cleaning Occurs or where Floor Repairs are required. It can be applied on areas such as Dairies, Warehouses, Sewerage Treatment Plants, Chemical Industries and Vehicle Aircraft Workshops.

Colours: Clear (Un-Filled), Gloss – Semi Gloss Finish

deafault-divide

| SDS – Part APart B
| Product Data Sheet

Campoxy SFE Sealer


2 Pack Epoxy coating which is Solvent Free and Low Viscosity, specifically designed for sealing porous substrates. In some cases it will minimise the degree of Surface Preparation required for Subsequent Good Adhesion. It has unique Absorbent Properties and is ideal for Sealing Concrete, Masonry and Binding Rusted Surfaces prior to Over Coating, which often eliminates the requirement for blasting or application of multiple seal coats. It will Waterproof Cementious Substrates and even Damp Conditions, only if used correctly. It can be applied for Sealing Timber, Concrete, Cementitious Surfaces prior to Painting, Protecting Cobblestones, Concrete Floors from Oil Staining, Waterproofing and as a Binding Sealer on Rusted Surfaces.

Colour: Clear.

deafault-divide

| SDS – Part APart B
| Product Data Sheet

Campoxy SFE Sealer DS


2 Pack Epoxy coating which is Solvent Free and Low Viscosity, specifically designed for Sealing Damp Surfaces. In some cases it will minimise the degree of Surface Preparation required for Subsequent Good Adhesion. It has unique Absorbent Properties and is ideal for Sealing Concrete, Masonry and Binding Rusted Surfaces prior to Over Coating, which often eliminates the requirement for blasting or application of multiple seal coats. It will Waterproof Cementious Substrates and even Damp Conditions, only if used correctly. It can be applied for Sealing Timber, Concrete, Cementitious Surfaces prior to Painting, Protecting Cobblestones, Concrete Floors from Oil Staining, Waterproofing and as a Binding Sealer on Rusted Surfaces.

Colour: Clear.

deafault-divide

| SDS – Part APart B
| Product Data Sheet

Campoxy SFE600


Solvent Free, 100% Volume Solids Epoxy Coating that is Cured by Cycloaliphatic Amine Adduct. It has excellent Resistance to Alkalis, Solvents and Mild Acids. It provides a Strong, Durable Surface with excellent Adhesion Resistance and is a Permanent Moisture Barrier. It will Tolerate Damp and Cold Curing Conditions and Display Good Adhesion and Abrasion Resistance. Fillers and / or aggregate may be added if a trowelling compound is desired. It is suited for New and Existing Concrete Floors. With suitable Aggregates as a Non-Skid coating for Decks, Ramps and Stairs. It can be used for Food and Beverage Preparation Areas, Chemical Industries, Mining Industries, Oil and Petroleum Industries, Water and Sewerage Installations, Marine Applications and Speciality Architectural.

Colour: White, Clear and a Variety of Colours, including AS2700 colours. Gloss Finish.

deafault-divide

| SDS – Part APart B
| Product Data Sheet

Campoxy SFE600 Fast Cure


Is a 100% Solids Epoxy Coating, which is Faster Curing than standard Campoxy SFE600. It has excellent Resistance to Alkalis, Solvents and Mild Acids. It can tolerate Damp and Cold Curing Conditions and it Displays Good Adhesion and Abrasion Resistance. Fillers and/or Aggregate may be added if a Trowelling Compound is desired. It is ideally suited for coating New and Existing Concrete Floors; For Concrete Repair Work and with the Addition of Aggregates as a Non-Skid coating for Decks, Ramps and Stairs. It may be used on Chemical Industries, Mining Industries, Oil and Petroleum Industries, Water and Sewerage Installations and Marine Applications.

Colour: Clear, Semi-Gloss Finish.

deafault-divide

| SDS – Part APart B
| Product Data Sheet

Camtect AU660 Accelerator


Is a Specifically Formulated Solution designed to Speed the Cure Response in Camtect AU660 Products. It is added as a Third Component to the Camtect AU660 Mix. It should only be used when Cold Temperatures are experienced during the Application. It is not recommended for use when the Temperature Exceeds 20˚C. It is ideal for the use on Decreasing the Tack Free and Cure Times in Camtect AU660 Acrylic Urethane and specifically designed for the use in areas where Cold Temperatures are expected to extend the Drying Time.

Colour: Clear.

deafault-divide

| SDS – Part APart B
| Product Data Sheet