Water Based Top Coats

Acromastic Black


Is a Water Based Bitumastic Water Proofing Membrane Coating. Forms a Highly Flexible and Durable Water Resistant Barrier, this product will Adhere to surfaces such as Out Side of Tanks, Retainer Walls, Lining Inverted Roofs, Lining Box Gutters and Balconies. It is designed to be applied to High Builds, and provides excellent Protection on Concealed Surfaces, as well as being suitable for Exterior Exposure because of its Acrylic Modification.

Colour: Satin Black.

Camelastic Top Coat White


It is a Premium Quality Elastomeric Coating which is specifically designed for Direct to Substrate Application. It can be applied to Exterior Surfaces to provide Protective Film that can deal with Expansion and Contraction. This product can be applied on Galvanised Iron, Aluminium, Concrete, Cement Render, Colourbond and Timber.

Colour: White.

Camilaflex


This is a Premium Quality Water Based Acrylic Membrane Coating. It is designed to produce a High Build Coating which is Extremely Flexible, Very Strong and which produces an Abrasive Resistant, Durable Finish for both Interior and Exterior Application. Fine Cracks of up to 1.5mm can be bridged and filled. The Smooth Glossy, Moisture Resistant Surface will allow water to run-off and Protect the Substrate by Limiting Penetration. It can be applied to Masonry, Plaster, Concrete, Brick, Cement, Asbestos and Galvanised Iron. It is also suitable for food processing areas, particularly where a humid environment exists.

Colour: White standard, Gloss Finish. Large colour range possible.

Cosmic Flat Plastic


Is a Premium Quality Acrylic Latex Decorative Coating which is designed for Both Exterior and Interior use. It has Full-Bodied Consistency and provides excellent Opacity and Ease of application, Drying to Tough, Durable, Flat Finish. Protection from Algal and Fungal Growth is provided from an Active Biocide designed into the coating. It has been specifically designed for use on Interior Walls and Ceilings, however due to its Unique Tough, but Flexible Finish, it may also be used Under Eaves, Direct to Plaster and Gyprock, Brick, Cement Render, Fibre Sheeting and is Suitably Primed Wood and Plaster Glass.

Colour: White and the Standard Cameleon Colour Range, Flat Finish.

Everbrite


Premium Quality Water-Borne, 100% Acrylic Polymer Coating that is formulated to provide Excellent UV Protection and Resistance to Moisture and High Humidity. With the addition of UV Stabilisers and Film Biocides, it provides and Outstanding Gloss and Colour Retention, and Protection from Algal and Fungal Growth. It will also provide a Strong, Flexible and Durable Surface with excellent Adhesion that is Fully Scrubbable. It can be used on Plaster, Gyprock Timber, Plasterboard, Brick and Cement Render, Fibre Sheeting, Masonry and Metal.

Colour: White and the Standard Cameleon Colour Range. Gloss, Satin, Low Sheen and Matt Finish.

Lifetime


Premium Quality Waterborne Coating formulated as an Interior Finish for Walls, Ceilings and Wood Work. It is based on a 100% Acrylic Polymer and provides exceptional Strength, Durability and Flexibility. The Cured Coating is completely Scrubbable providing a Decorative Hard-Wearing Finish, especially Important in Areas where Paint Finishes can be easily marked. It is ideal for ceiling and walls in Kitchen and Dining Areas, Bedrooms, Lounge and Games Rooms, Bathrooms and Laundries.

Colour: Cameleon Standard Pastel Colour Range, Custom Colours upon Request, Satin, Low Sheen and Matt Finish.

Modacalce


Premium Quality Water Borne Acrylic which provides an Ultra Flat, Finely Textured Finish. It has been specifically formulated to provide the Appearance of a Mediterranean Wash, with the Durability to withstand the Harsh Australia Environments. With UV Protection Resin Technology Combined with Built in Water Repellence, it provides a Long Lasting Durable Coating with Low Dirt Pick Up and Resistance to Mould and Fungal Growth. It is available in a wide range of colours, from whites and pastels to deep rich hues. It is the perfect choice where an ultra-flat finish is desired, and is ideal for masking less than perfect or uneven surfaces, both Interior and Exterior. It can be applied with suitable preparation to previously painted or textured coatings, where its own fine texture and filling properties will provide additional enhancement. It can be applied on Masonry and Concrete, Cement Render, Galvanised Iron, Fibre Sheeting, Plaster and Gyprock.

Colour: White and Full Cameleon Colour Range, Ultra-Flat, Fine Texture Finish.

Rooftop


Premium Quality Water Borne 100% Acrylic Coating designed specifically to stand up to the Harsh UV Rays experienced throughout Australia. It dries to a Tough, Flexible Film which is impervious to Water and affords excellent Protection from the Extremes of Australian Weather. It is the perfect choice for Exterior Roof Coating. It can be applied to prepared Cement and Concrete Roof Tiles, Timber, Galvanised Iron, Cementitious and Brick Surfaces, Fibre Board and Aged Colourbond Roofing.
Colour: White, Clear and Standard Cameleon Colour Range, Satin Finish.

Colour: White, Clear and Standard Cameleon Colour Range, Satin Finish.

Splendor


Premium quality water based Acrylic Vinyl Coating, formulated to provide a tough, hard finish for interior and some exterior applications. It is available in a variety of Sheen Levels, all of which dry to a smooth, easily washable finish. Matt Finish is particular suitable for Gyprock Ceilings and Walls. It is the perfect choice for ceilings and walls where a hard Washable Coating is required for Easy Maintenance. It is ideal for interior living areas and external walls, including; Bedrooms, Bathrooms and Wet Areas, Kitchens and Living Areas, Exterior Walls, Eaves and Timber.

Colour: White and Full Cameleon Colour Range, Matt, Low Sheen and Satin Finish.

Texas


It is a Premium Quality Acrylic Textured Membrane Coating exhibiting excellent Moisture and UV Resistance. It has been specially formulated for both Interior and Exterior Applications, and will provide a Tough, Flexible, Abrasion Resistant Coating with Excellent Durability. Due to its unique Consistency and Low Sheen, Texas allows a Uniform Textured Finish that will Bridge Hairline Cracks, and allow Imperfect and Uneven Surfaces to be hidden. It can be applied to substrates such as Masonry and Cement Render, Concrete and Plaster, Cement Fibre Sheeting, Brick and Plaster, Galvanised Iron and Gyprock.

Colour: White, Cameleon Standard colours. Low Sheen Finish.

Texas Modified


It is a Premium Quality Acrylic Textured Coating, modified from Standard Texas, for use in Special Applications. The main feature is its ability to Bridge Fine Cracks whilst producing a Smooth, Fine Textured Finish which is Strong, Flexible, Durable and Washable. It is formulated for Interior use where cracks have appeared on Plaster Walls, and it will Dry to a Low Sheen Finish and is available in a Large Range of Colours. It may also be used in Exterior Applications where a more Subtle Textured Finish is desired than the Traditional Standard Texture Coatings. It is ideal and suitable for Masonry and Cement Render, Concrete and Plaster, Cement Fibre Sheeting, Brick and Plaster, Gyprock and Brick.

Colour: White, Cameleon Standard colour. Low Sheen Finish.

Timbacuva


It is a Premium Quality Water Borne 100% Acrylic Coating, specifically Designed and Formulated for Interior and Exterior Applications on all Types of Timber. Drying to a Tough, Flexible Finish, it affords excellent Durability, especially designed to withstand the Harsh Australian Environment. When correctly applied it will protect against UV and Moisture for up to 10 Years. It has a Smooth Low Sheen Finish, and is available in a Wide Range of Fashionable, Natural and Earthy Colours. It is ideally suited for Timber, Fibre Sheeting, Particle Board, and Suitably Primed Metal. It can be applied by Brush, Roller or Airless Spray. 2 Coats are required for Optimum Performance and Protection.

Colour: White and Full Cameleon Colour Range, Low Sheen Finish.